|
|
Your new Sticky Pod® is made from
industrial suction cups that have an enormous
amount of suction strength. This is good for
your camera, but requires very careful use.
Please follow these careful rules, and use
common sense when applying your Sticky
Pod®:
|
 |
Clean your suction cups with hot
water and soap. Water will not harm your Sticky
Pod, just place it in your sink. Be sure to keep
them clean on a regular basis. If your Sticky Pod
loses its grip in a short amount of time, you must
clean your suction cups right away. Take a cloth
rag and some clean water with you in the field to
help keep them clean. |
- Although your Sticky Pod has been
tested and can endure for many weeks, never
assume your Sticky Pod® will
stay in place forever, it will NOT. Always
clean surface and suction cups before
applying Sticky Pod®.
- When applying to glass, always support
the glass on the opposite side of the
Sticky Pod. The glass may break if you do
not. Never apply to thin, weak or broken
glass because these suction cups will break
it.
- Always secure your camera with a tether
line when using your Sticky Pod®
on any vertical (all angles), inverted or
moving surface. This is not only for the
safety of your camera, but more
importantly, for the safety of those around
you. Always remember to care for your
camera. You can always replace a Sticky
Pod® for less than a
camera.
|
|
Your Sticky Pod consists of three (3) basic
components:
- The base
- Extension
- Knuckle
The most common Sticky Pod configuration is
to screw the extension to the base, then
the knuckle to the extension. Of course, you
can attach any Sticky Pod component to one
another or the base. Your camera
will attach to any Sticky Pod component.
The Sticky Pod uses all the same threads as the
mounting socket on your camera.
|
| When attaching an extension to
your knuckle, always be sure to remove the
round camera plate on the top of the
knuckle. Once your extension is attached,
be sure to reattach your camera plate to the
top of your extension. |
 |
 |
 |
Heibel Enterprises, LLC, Tom Heibel and/or
Sticky Pod® will not reimburse you for any
damage to your camera, vehicle, anyone or
anything hurt by using a Sticky Pod camera
mount. Because of the design, the only way to
damage your camera, vehicle, persons, property
or things is to improperly use your Sticky
Pod®. Please think about what you’re doing and
ask if you have any questions. You can always
find me on my website or you can call:
303-910-8080
|
|
Home Products Online Store Customers FAQs Videos Pictures
|
|
|
|
|
|
Hi Tom,
I used your Sticky Pod system on an Indy car on the St. Petersburg GP road course. Most of the INDY officials were skeptical that your system would stay on an INDY car @ speed. I knew It would do fine. I stuck it on the car and the footage turned out great, and most importantly it held our $35,000 camera on and kept it from damaging a $600,000 race car.
Matt Barker
Director of Photography
Army National Guard
|
|
Proudly
Made In The USA
|
|
I would just like to thank
you guys for creating just a quality product. I
received my Sticky Pod today and have already
put it to good use. I would also like to thank
you guys for your fast shipping. As a fellow
business owner I know how hectic things can get
and how sometimes time constraints are
overlooked. Thanks again and I will be
recommending your products to customers and
friends alike.
Phil McCarthy CEO of Verdict
Motorsports Inc.
Chicopee
Massachusetts
|
|
